1. Night Vision Settings
By default your Invidyo camera will be in Automatic Night Vision mode. This means that the camera will turn off night vision during the day and turn it on during the night. This the recommended setting.
You can check the night vision mode of your camera from by checking out the image on the "night vision" button. It is the leftmost button in the camera live screen. Below picture shows a camera in "Auto" night vision mode.
In order to change the night vision mode of your camera, simply tap the "night vision" button. With the first tap, the cameras night vision mode is switched to OFF. This means that the camera won't turn on the IR Leds even in the dark and you wont be able to see much at night. Use this setting only if you have a specific reason to turn off the IR lights at night. Below is a picture showing a camera with night vision set to off.
If you tap the night vision button again the camera will switch to nigh vision always ON mode. In this mode, the night vision IR lights will always be ON and the video will be in grayscale. Again use this mode only if you have a specific reason to do so. Below picture shows a camera in night vision always ON.
2. Turn ON/OFF
Click on the Turn Off camera button on the camera live screen to turn off your camera.
When you press the "Turn Off" button, you will be presented with the option to turn the camera for a pre-determined amount of time or to turn it off untill you turn in back on as shown in the screenshot below.
When you click "TURN OFF", your camera will be turned off. And the Live View screen will be updated to show that the system is not receiving live video from your camera as shown below.
To turn your camera back on, simply press the Turn Off camera button again. You will be presented with a confirmation prompt.
When you turn on the camera the live feed will automatically start showing live video from your camera after about 10-20 secs.
3. Two Way Audio
You can use the 2-way audio button on the camera live screen to send your voice through the camera.
Note: The first time you press the 2-way audio button, the app will ask you for permission to use your microphone. If you reject this permission you will not be able to use the 2-way audio feature.
Once you give the necessary permission, you can use the 2-way audio feature by clicking and holding down the button. Your voice will be sent to the camera for as long as you keep pressing the button. Voice transmission will stop when you release the button. The below picture shows the 2-way audio button on the live screen.
4. Advanced Settings
You can configure advanced notification settings for your camera from the menu accessed by pressing the settings button on the live view screen. Below image shows the settings button. Details of Advanced settings are covered in the advanced settings article.
Below Image shows the advanced settings button on the live screen.
5. Full Screen
You can watch your video in full screen by pressing the full screen button on the live screen. Below image shows the full screen button.
When you press the full screen button, you are presented with the full screen view. Live screen settings buttons are also available in the full screen view as shown below.